2
Manganese Ore HGMS for Tailing Recovery
Product Description:

Manganese is an important raw material in the steel industry, accounting for about 90% manganese consumption. The rest is used in light industry, chemical industry, medical industry and so on. However, there are abundant low-grade manganese ore resources, and the quality of manganese concentrates is far from meeting the market demand. Therefore, it’s imperative how to develop and utilize low-grade manganese ore resources.

In the past, many dressing plants adapted washing method to recycle coarse manganese ores, and fine particles with a large amount of slime were directly discharged into tailings pond, which caused a great wast of  useful metals. In order to make full use of low-grade manganese resources, our technicians have made a lot of experiments and done some adjustments to the HGMS. In recent years, through our extensive research tests and practical applications, it proves that updated Manganese Ore HGMS has a good effect on the separation of low-grade manganese ores, which shows a good application prospect. Here’s exploratory test indexes in China.

The Industrial Application of Manganese Ore HGMS

1.37,500 tons/year Lead-zinc Ore Tailings Recycle Project in QiXiashan, Nanjing

There’s a old mining plant in QiXiashan, which is mainly engaged in lead-zinc ore benefication. Its annual tailings are 150,000 tons, which contain about 12% Mn and 18,000 tons of manganese metals. If the Mn grade of tailings can be upgraded to more than 22%, it can be used as the raw material for manganese sulfate. In 2005, MaAnshan Institute of Mining Research has introduced two SLon-1500 Wet High Intensity Magnetic Separator(WHIMS) to recycle manganese concentrates from the tailings. Finally, the grade of Mn is increased from 12% to 24% by the coarse-to-fine method, and the recovery rate can be reached to 50%. The whole process produces 37,500 tons/year manganese concentrates, which creates a huge economic benefit for the factory.

2.ManganeseOre Tailings Recycle Project of Jinshui Mining Company

Jinshui Mining Company is located in Inner Mongolia, China. It used to select coarse manganese ores by washing method. Later, they purchased SLon-1000, SLon-1250 and SLon-1500 WHIMS to collect fine-grained manganese ores. After only one separation, the Mn grade can be increased from 8.85% to 30.39%, and the recovery rate is 75.30%.  

3.Low-grade Manganese Benefication Project of Yongdeng Mining Company

In 2005, Yongdeng Mining Company in Gansu province built a manganese ore concentrator and adapted SLON-1250 and SLON-1500 WHIMS to deal with low-grade manganese ores. The raw materials contain 16.94% Mn, which need to be ground to -200 mesh accounted for 83%. Through one SLon strong magnetism, the Mn grade of manganese concentrates can reach to 31.88%, and the recovery rate is 61.20%.

4.Conclusion

Through plenty of practical applications in a large number of manganese mining enterprises, it turns out that SLon WHIMS has a good separation effect on low-grade manganese ores with fine particle size. The manganese enrichment ratio can reach 1.44 ~3.43, and the manganese recovery rate can reach 53% ~ 83%, which makes the price and quality of manganese concentrate rise perpendicularly, and brings considerable economic benefits for mining enterprises.

Product Features
  • Low voltage, high current and low current density.Internal water cooling and double circulation cooling mode stable magnetic field. Equipment operation rate is up to 98%;
  • Optimized magnetic system design, optimal arrangement and combination of magnetic matrix, background field intensity up to 1.8T. vertical rotation, reverse flushing achieve magnetic matrix is not easy to block;
  • Pulsation mechanism design could improve the separation efficiency;
  • Wide separation range: upper limit:6mm, lower limit :2~10μm;
  • 17 series of products with more than 70 specifications and models, and capacity of a single unit is from 0.01 to 480t/h;
  • Equipped with coil pipeline cleaning system, easy for coil daily maintenance. coil designed life is up to 10 years.
Product Details
How does it work?

Slurry is introduced through slots in the upper yoke to the matrix, which is housed inside the vertical ring. The magnetic particles are attracted to the matrix and then carried outside of the magnetic field where they are subsequently flushed to the magnetic concentrate trough. The non-mags pass through the matrix to the non-mags collection hoppers.

Technical Parameters

Parameters of SLon VPHGMS

Feed density/%

Slurry throughput /(m3/h)

Ore throughput /(t/h)

Background field /T

power consumption/kW

Flushing water /(m3/h)

Cooling water consumption /(m3/h)

Max part weight /t

Dimensions (L*W*H) /mm

SLon-500

10~40

0.25~0.5

0.015~0.063

1/1.1

13.19

0.75~1.5

0.75~1.5

0.3

1800×1400×1350

SLon-750

10~40

0.5~1.0

0.03~0.125

1/1.1

17.55

0.75~1.5

0.75~1.5

0.6

2100×1400×1750

 

SLon-1000

 

10~40

12.5~20

2~4

1/1.2

19.1

8~14

2~2.5

1

2700×2100×2300

SLon-1250

10~40

20~50

5~18

0.6

14.5

20~36

1.5~2

2.6

1900×2300×2550

SLon-1500

10~40

50~100

15~50

0.4

16.2

40~60

2~2.5

3

1800×2600×3000

SLon-1750

10~40

75~150

15~50

0.6

28

60~100

2~3

7

2520×3150×3550

SLon-2000

10~40

100~200

25~80

0.4

18

80~120

2.5~3.5

7

2680×3000×3950

SLon-2250

10~40

160~300

40~115

0.4

23

120~160

2~3

9

2910×3200×4250

SLon-2500

10~40

200~400

50~150

0.6

46.5

160~220

3~4

8

3490×3800×5050

SLon-3000

10~40

350~650

75~250

0.7

63

240~400

4~5

15

4050×4850×6150

SLon-3500

10~40

550~1000

125~400

0.6

88

400~600

6~7

17

4500×4850×7000

SLon-4000

10~40

750~1400

175~550

0.6

102

560~800

7~8

21

5090×6220×8120

SLon-5000

10~40

1200~2300

300~480

1/1.1

124

560~800

7~8

52

6060×8000×10100

Recommended Products
Leave a Message

If you are interested in any product, please contact us. We will introduce our products to you in more detail